|
Function Generator 1013
- Five different wave forms: Sine, Square, Triangular, Rectangular & Ramp.
- DC Offset on all waveforms
- Frequency Range: 0.01 Hz to 1 MHz
- External AM, FM & SWEEP Modulation
- Sync O/P: TTL Compatible.
Technical Specifications: -
Frequency Characteristics
Range
|
0.01 Hz to 1 MHz in eight decadic ranges
|
Readout
|
3.182 Digit panel meter (DPM)
|
Accuracy
|
+-3% of setting +- 0.1% f.s. upto 100 KHz
|
Stability
|
Within 0.5% after an initial warm up of 20 minutes
|
Output Characteristics
Amplitude and offset range:
|
Coarse
|
Amp. Signal level
|
Offset level
|
setting
|
(open ckt.)
|
(open ckt.)
|
20V
|
2V to 20V (pk-pk)
|
0 to +- 5V
|
2V
|
0.2V to 2V (pk-pk)
|
0 to +- 0.5V
|
0.2V
|
0.02 to 0.2V (pk-pk)
|
0 to +- 0.05V
|
The Fine Amplitude control varies the signal level from selected COARSE Level down to its 1/10th value. The OFFSET control varies the offset level (selected by COARSE AMPLITUDE Control) between the two-polarity extremes.
Amplitude Readout
|
3.1/2 digit panel meter, reading peak output
with an accuracy of +-5% of setting
|
Amplitude Flatness
|
+- 2% from 0.01 Hz to 10 KHz, +- 5% from
10 KHz to 100 KHz.
|
Waveform Characteristics
Sine Wave Distortion
|
1.0% typical for 10 Hz to 10 KHz; 1.5%
typical for 10 KHz to 100 KHz
|
Pulse/Square Wave
Rise and Fall Time
|
100 ns. approx.
|
Pulse/Ramp
Asymmetry
|
20 : 80 to 80 : 20 Frequency will deviate
from set frequency
|
Ramp/Triangular
Wave linearty
|
2.5% for 0.1 Hz to 100 KHz; 5% for .1 Hz
to 0.01 Hz
|
Output Impedance
|
5 ohms +- 5%; 600 ohms +- 5, Signal
can be connected to any ONE at a time
|
Protecion
|
The output is short circuit protected.
|
External Modulation
Modulation
|
1 AM: Approx. 1.5V pk-pk approx. for
30% modulaion
2 FM: Approx. 3V pk-pk aprox. for 5%
deviation
3 SWEEP: Approx. 3V pk-pk approx. for
1:10 sweep
|
TTL Output
|
TTL Compatible out signal level.
|
General:
|
Temperature Range
|
10oC to 45oC
|
Power Supply
|
230 V; +- 10% (50 Hz)
|
Accessory
BNC to Crocodile Cable 1 No.
|
|
